Why is My Refrigerator Water Dispenser Not Working?

broken refrigerator water dispenser

Is the water dispenser on your refrigerator not dispensing water? If not, you can attempt to repair the issue on your own or call College Station Appliance Repair for refrigerator repair College Station, Texas.

There are several reasons for a water dispenser in a refrigerator to not work anymore. Again, some of the reasons could sound a bit crazy. However, something as simple as an off switch on the refrigerator has been the reason before. Be sure to inspect the obvious potential problems before moving forward with refrigerator repair. Let’s start to cover this appliance repair problem and see all of the reasons we can reference for a broken water dispenser on a refrigerator.

The reason for a water dispenser not dispensing is typically an installation issue, a filter issue or frozen water lines:

New Refrigerator Installation Issues

You just purchased a new refrigerator for your kitchen with a water dispenser, but it’s broken. The water dispenser must be hooked up to the water line. That might be the reason for the issue.

If your new refrigerator is replacing an old refrigerator that did not include a water dispenser or ice maker, there is a chance that you do not have a water line near this area of the kitchen. Most of the time a water line is commonly run from under a house either in a crawl space or basement. You can buy this line at nearly any home repair store and they’re pretty simple for even the average homeowner to install. Typically they have a a water shut-off valve, which is necessary so that if you ever need to move the refrigerator, you can shut off the water.

If there’s a connected water line, is the valve on? The valve handle must be in line with the hose. And, is water going through the pipe you have used to connect the water line? Simple and questions, but items that need to be confirmed.

If you removed the doors during installation the water dispenser might not be plugged in. Review the manual to find the wire harness for that particular model of refrigerator. Check that it’s plugged into the refrigerator.

When the water line is connected, usually there is air in the line. So, lifting and lowering the water dispenser lever on the refrigerator to get the air out of it is necessary.
Filter Problems

On some of the popular refrigerators, there are different filters. These filters could “expire”, become clogged or become frozen. All of the filters are dependent on the style and brand of refrigerator. If your filter is clogged it can cause slow filling or no flowing. It’s suggested that your filter should be changed every 6 months. Changing filters in a refrigerator can be difficult. If you have problems, go online and learn the right process to replace a filter.

One idea is to fill the filter with water prior to installing it. A lot of time the water filters can need a long amount of time to fill, which could cause you to believe that the water dispenser on the refrigerator isn’t working right. You will want to read the owner’s manual if nothing is working. To be sure it is not air trapped in the water lines, we recommend to depress the dispenser lever for around 5 minutes.

A frozen water tank could be the reason for the problem as well on some models. If the water tank is frozen it will start to leak onto the fresh food bins. Low amounts of food in the fresh food bins might cause freezing to happen.